GQH-B - Carbon Dioxide and humidity sensor (Accessory to BCXb))

Introduction

GQH-B is a Carbon Dioxide and Humidity sensor intended for installation in a cooling beam with cooling beam controller BCXb.
The sensor is mounted above the grid of the baffle where the co-ejected room air passes the sensor. The unit consists of an uncapped circuit board and a cable with connectors for BCXb.

Mounting

GQH-B is screwed to the inside of the baffle, above the grid. The location must ensure that the sensor is exposed to the co-ejected room air. The unit is connected to the I2C port on BCXb using the supplied cabling.

LÄS MER HUR DU KAN SPARA ENERGI MED HJÄLP AV GIVARE

Download documents

Selected documents
  • No documents selected
 
PDF Settings
×
×