DCV-CFb - Pressure Control with Flow Measurement
+ DOCUMENTATION + CASE
DCV-CFb is a control unit that consists of a pressure regulator with flow measurement CFLb, a damper motor, and a damper with a measurement flange. Units with a circular damper (Ø125-500) are delivered pre-assembled at the factory. For other damper sizes, the damper, measurement flange, damper motor, and regulator are delivered separately.
Features
- Equipped with a pressure sensor for accurate and fast pressure measurement and regulation.
- Equipped with a flow sensor for flow measurement.
- Like the DCV-SPb, it can regulate to the lowest pressure in the duct that provides sufficient flow to the most unfavorable diffuser by reading the diffuser's opening degree. This minimizes noise levels. The most unfavorable diffuser can be shifted to another part of the system depending on the load.
- Can optimize the pressure of the unit using LINDINTELL by adjusting the damper opening degree, which increases or decreases the pressure on the unit.
- A number of parameters can be read and adjusted via the network and/or directly on the control unit using a connected user panel.
- Can be connected via node ID to a communication bus (CAN) for access and communication with other cooperating nodes.
- Factory-calibrated pressure sensor and flow sensor.
- Menu-driven commissioning after logging into the regulator.
- Can communicate with other systems via LINDINTELL or via Gateway NCE with Modbus TCP/RTU.
User Interface
- Login to the server with the system software LINDINTELL.
- Web tool LINDINSPECT.
- Bluetooth® for access via the LINDINSIDE mobile application.
Included Components
- Pressure regulator with flow measurement - CFLb
- Damper motor - DBA
- Circular damper with measurement flange - SPMF